After entering the Zero Angle sub menu, select Cal Zero Angle and then follow the prompts to enter the required data for your shooting environment and target. When shooting at your zero target, make sure your scope turrets are dialed to zero elevation, donâ€™t hold any elevation in your reticle and place the cross-hairs directly on the target (point of aim). After firing enough shots to be confident of your average point of impact, measure the distance between your point of aim and average point of impact. Enter this value in the Cal Zero Angle calculator field asking for the Impact Height at Target, (impacts above the point of aim are positive and below are negative). After calculating the Zero Angle, press Exit and when prompted, accept the Zero Angle value.